Pre-Wired Panel includes Tachometer, Oil Pressure, Water Temp, Battery Voltage. Also Includes Rocker Switches for Blower, Bilge Pump, Anchor/Nav Lights, Accessory and Key switch. Measures 14" x 6.5".
Jardum PV480 Digital Dash Display. Can Display Engine Parameters. CAN BUS NEMA 2000 Compatiable. Includes: Head Unit and harness from engine to head unit (up to 25' longer available at extra cost).
Jardum PV480 Digital Dash Display. Can Display Engine Parameters. CAN BUS NEMA 2000 Compatiable. Includes: Head Unit and harness from engine to head unit (up to 25' longer available at extra cost).
This large 7-inch display features a high-speed processor that allows you to bring even more into your application. In addition to providing vital engine information, the 700 packs an infotainment hub in the cab with media playback from your phone via USB. It also boasts AM/FM stereo, Bluetooth and Wi-Fi connectivity.
The MG3000 tachometer is a premium digital gauge with stylized black fade dial and back-lit graphics, red back-lit pointer, LED back lighted dial, black mask and fog-resistant polycarbonate lens. It features a daylight readable LCD that is visible even in direct sunlight. A user-friendly, the menu interface is easy to use. Can be customized with user definable screens and alarms and it connects to the CAN bus and communicates directly with the engine ECU. Engine data, fault codes and alarms are displayed on the tachometer's LCD display. There are 3 analog inputs which can be used for air temperature, trim, fuel level and water pressure and a NMEA 0183 input for a GPS antenna for Lat/Long, Heading, COG and clock. CAN BUS Compatible.
Faria CAN BUS Tachometer Kit. Includes Tachometer and Wiring Harness. The MG3000 tachometer is a premium digital gauge with stylized black fade dial and back-lit graphics, red back-lit pointer, LED back lighted dial, black mask and fog-resistant polycarbonate lens. It features a daylight readable LCD that is visible even in direct sunlight. A user-friendly, the menu interface is easy to use. Can be customized with user definable screens and alarms and it connects to the CAN bus and communicates directly with the engine ECU. Engine data, fault codes and alarms are displayed on the tachometer's LCD display. There are 3 analog inputs which can be used for air temperature, trim, fuel level and water pressure and a NMEA 0183 input for a GPS antenna for Lat/Long, Heading, COG and clock. CAN BUS Compatible.
A 60 MPH boat speedometer gauge manufactured by Medallion Marine, part number 8650-00084-19 . Commonly used on Larson Boats. Measures approximately 4 5/8" diameter across the face including the bezel x 3" deep overall including threaded bolts. Requires an approximate 4 1/4" diameter cutout. Mounting bracket included. Connects via (1) 4 pin Male Deutsche plug. Innovative design with a digital read out.
The smallest, fastest, and most versatile OBD adapter yet. Plug and play automotive tool that connects to the onboard diagnostic port (OBDII / CAN), retrieves information from your engine's computer, and wirelessly transmits to your smart phone, tablet, smart watch, or PC. Compatible with MEFI 6C - MEFI 7.